Evolabel Blow Applicator

From side or top without touching the target. No moving parts allows up to 90 labels / minute. For D43 printer.

 

A unique air-knife applies the label to the product with precision without touching it. The apply distance can be as long as up to 100 mm (3.94").

No moving parts gives very high speed – with the standard printer up to 90 labels/min with dynamic data. With optional high-speed printer version, the capacity is up to 180 labels/minute. The same applicator can handle label sizes from 35x35 mm to 100x100 mm.

Easy Access

When changing from one label length to another, the air knife position is easy to set with a thumb screw. This is easy even in a dark environment with the built in LED that lights up inside the applicator.

Technical Specifications

Evolabel Blow applicator is developed with ease of use and reliability in focus. It works with a fan holding the label and an air knife blowing the label to the product. The Blow applicator handles label sizes from 35x35 mm up to 100x100 mm.

The Blow applicator is designed for print and apply labels without touching the product that is to be labeled. It can handle both top- and side- labeling applications.

The Blow applicator is mounted on two arms on the printer, that lifts the applicator out of the way when changing paper. It ha also one tube for compressed air and one CAN-cable for the electrical interface, then it is ready to go!

Apply speed:	Up to 120 labels/min
Suitable printer models:	D43
Air supply:	6 bar, clean and dry
Communication:	CANopen
Maximum label size (WxL):	100x100 mm
Minimum label size:	35x35 mm
Label apply technology:	Compressed air, linear cylinder
Maximum apply distance:	Up to 100 mm (depending on label size)
Apply speed:	Up to 120 labels/min
Surrounding temperature (operation):	+5°C to +40°C
Humidity:	20 to 85%
External dimensions (WxHxD):	170 x 70 x 100 mm

BROWSE ALL PRINT & APPLY APPLICATORS & PRINTERS